EIFS - Impact Render
EIFS Impact is a polymer and silicate modified, mineral based, trowel-on skim coat specifically designed for application to polystyrene foam panel.
The product is trowel applied to the face of foam panel in a thin section of 1 to 1.5mm in combination with fibre reinforcing sheet. The cured film creates a tough impact resilient surface to the normally soft foam, making the foam suitable for use as a lightweight panel for the construction of exterior walls and fencing.
The product is supplied in a 20 kg paper sack. On site or factory mixing requires only the addition of fresh clean water to a desired consistency. No additional polymer additives are required and should not be added.

Suitable Substrates:
Polystyrene foam.
Cast foam.

© Technical Bulletin