EZY-FLOAT - Marble Skim Fine
Ezy-Float Marble Skim Fine is a polymer modified, mineral based, trowel-on skim coat that is principally
used where a fine-feathered edge is required prior to the application of a low profile texture coating. The product will cover surface misalignments of 2 to 3mm and will feather down to a fine edge of 0.35mm. The product is supplied in a 20kg paper sack. On site mixing requires only the addition of fresh clean water to a desired consistency. No additional polymer additives are required and should not be added.
The product is a pre-blended powder mix that contains premium grade crushed marble, Type HE Portland Cement, conforming to Australian Standard 3972 and proprietary additives that provide an exact viscosity profile suited to itís intended use.
The product is modified with very high levels of flexible polymers and hydrophobic agents that ensure a well adhered render with excellent resistance to water, efflorescence or rising damp.
Ezy-Float Marble Skim Fine is designed for over coating with acrylic textures and coatings while in combination providing strong inter-coat adhesion. It bonds to most mineral and new construction surfaces and exhibits minimal to no drying shrinkage.

Suitable Substrates:
All masonry substrates.
Concrete block.
Hebel®.
Wire cut clay block.
Off form concrete.
Unglazed brick.
Over painted surfaces with Armatex Dash applied first.
Over Low suction and hard faced brick with Armatex
Dash applied first.

DOWNLOADS - PDF
© Technical Bulletin