EZY-FLOAT - Concrete Block Render
Ezy-Float C.B.R is a polymer modified, mineral based, trowel-on render that was developed to provide an acrylic render with application properties similar to that of a traditional sand cement render.
C.B.R is easily to apply and simple to float finished with a high density blue polystyrene foam float producing a flat and uniform rendered appearance that it easy for the applicator to achieve.
The product is supplied in a 20 kg paper sack. On site mixing requires only the addition of fresh clean water to a desired consistency. No additional polymer additives are required and should not be added.
The product is a pre-blended powder mix that contains premium grade crushed marble, Type HE Portland Cement, conforming to Australian Standard 3972 and proprietary additives that provide an exact viscosity profile suited to itís intended use.
The product is modified with high levels of flexible polymers and hydrophobic agents that ensure a well adhered render with excellent resistance to water, efflorescence or rising damp.
C.B.R is designed for over-coating with acrylic textures and coatings while in combination providing strong intercoat adhesion.
C.B.R bonds to most mineral and new construction surfaces and exhibits minimal to no drying shrinkage.

Suitable Substrates:
Masonry substrates.
Concrete block.
Hebel®.
Wire cut clay block.
Unglazed brick.

DOWNLOADS - PDF
© Technical Bulletin