Armatex - Velvet Trowel On
Velvet Trowel-on is a 100% acrylic, water reducible, texture paste that requires a topcoat for maximum performance. The product is formulated to provide a ready to use material that can be trowel
applied straight from the drum to a suitably prepared vertical wall. The final result is a unique textured finish with a similar appearance to that of a traditional sand
and cement render.
The applied finish is a low granular profile with a dry film thickness of approximately 0.65mm. Common to all Armatex finishes, carefully graded washed and dried sands are blended with Astec second generation acrylics to form a flexible product that is extremely well bound and will not crumble even when it is feathered to a fine edge.
Armatex provides a strongly adhered film with outstanding exterior durability.

Suitable Substrates:
Armatex Velvet is suitable for application to smooth surfaces such as F.C. Sheeting, Plaster Board, Villa Board, Off Form Concrete and only smooth Cement Render.

© Material Safety Data Sheet
© Technical Bulletin